Thursday, September 8, 2011

How to install Cisco Unified Communication Manager version 8.x in VMWare?

Cisco Unified Communications Manager Version 8.0 
Cisco Unified Communications Manager Version 8.0 is the powerful call-processing component of the Cisco Unified Communications Solution. It is scalable, distributable, and highly available enterprise IP telephony call-processing solution. Follow the given points to install CUCM 8 in vmware step by step. 
             Turn off your Window's Firewall and set a static IP in your Loopback Adapter.  
            Configure a NTP Server in GNS and connect with VMware through Cloud. 
Step-3 (a)
username and password.
Now Configure VMware with these settings. Select Typical option. 
Step-3 (b)
                  If you have CUCM-8.0 IOS in DVD then select Installer disc option, If you have CUCM-8.0 IOS in your hard disk or flash drive then select Installer disc image file (ios). Do not select option I will install the operating system later. 
Step-3 (c)
                 Provide information like Name, User name, Password. 
Step-3 (d)
                 Provide Virtual machine name e.g (CUCM 8) and Browse the location where you want to save the CUCM 8 files. 
Step-3 (e)
                 Allocate hard disk size, Minimumm size of hard disk for CUCM 8 is 72 GB and select option Store virtual disk as a single file. 
Step-3 (f)
                Allocate Memory more than 2GB to run CUCM 8 properly and also configure Network Adapter as a Bridged. 
After step-3 virtual machine settings are complete. Power On this Virtual machine (CUCM 8).
Step-4 (a)
                 If you want to check your media resources (e.g hard disk, RAM etc) then select Yes, but if don't select No. This media check is Optional. 
Step-4 (b)
                 Cisco Unity Connection and CUCM Business Edition are not supported on current hardware. 
Step-4 (c)
                 Select Yes for further installation. 
Step-4 (d)
                 Select Proceed for further installation. 
Step-4 (e)
                 If you have any Upgrade patch regarding CUCM 8.0 then select Yes otherwise select No. 
Step-4 (f)
                Select Continue for further installation. 
Step-4 (g)
                Select your Timezone and select Yes for further installation.
Step-4 (i)
                 If you want to change MTU size then select Yes, if don't select Nom, then next step If you want DHCP on this machine select Yes, if you don't select.
Step-4 (k)
                Provide Network configuration. 
Step-4 (l)
               If you want to enable DNS client on this machine select Yes otherwise No. 
Step-4 (m)
                 Provide OS Administrator Login

Step-4 (n)
                Provide Certificate Information. This option about your organization information.
Step-4 (o)
                Select Yes if this CUCM is Publisher. Select No if you have already a Publisher. 
Step-4 (p)
                Provide NTP server's IP address as provided in step-2. 
Step-4 (q)
                Provide Security Password. This password is used in Clustering. 
Step-4 (r)
                If you want to configure SMTP select Yes but if you don't select No.  Now                 Provide Application User Configuration. 
Step-4 (t)
               Select Ok if you provide correct information. Select Back if you want to change anything.

No comments:

Post a Comment